|
|
To
obtain more information or to order
your Water Stabilizer contact one of our friendly and knowledgeable
hydro-experts at (760) 878-2357.
|
| Wailani
Infinifill Water Level Stabilizer Models |
Model
3005
|
Adds
water to pool, spa, pond and fountain. |
Fill
System with 24 foot sensor cord. Includes one irrigation quality water
valve. |
|
|
|
| Model
3105 |
Adds
and removes water for pools, spas, ponds, and fountains. |
Fill
and Dump System with 24 foot sensor cord. Includes two irrigation
quality water valves. Includes pump relay for removal of water. |
|
|
|
| Options: |
|
|
| SC |
Sensor
Cord In excess of 24 feet. |
Sensor
cord standard lengths available up to 100 feet. |
| 300-5 |
Individual
Fill/Ideal/Dump Sensors |
Used
for ultimate flexibility in setting water level heights. |
| Specifications: |
|
|
|
Input
Power
|
|
115
vac or 220 vac at 62.5 ma |
| Function
Delay |
|
Automatic
time delay between sensor changes and the start of the fill or dump
functions. Thus splashing, wave action and temporary bather load do
not affect fill or dump operation. |
| Front
Panel Indicators |
|
Wet
or Dry Sensor Indicators, Power On, System Mode, Freeze Guard, Sensor
Fault |
| Fill
or Dump Override |
|
If
the fill or dump function operates longer than it normally should,
the function will be ended. The fault light on the unit will illuminate.
If normal conditions and operation occur then the system will automatically
operate normally. The fault condition can be reset by cycling the
power. |
| Valve |
|
Irrigation
Diaphragm Valve |
| Valve
Voltage |
|
24
vac |
| Length
of sensor cord |
|
24
foot is the standard length. Standard lengths up to 100 feet. Long
distance cable lengths up to 500 ft. |
| Sensor
Assembly Colors |
|
Brushed
Aluminum |
| Controller
Enclosure |
|
Metal
outdoor enclosure. Powder Coated interior and exterior.
8" x 10" x 5" |
|
