|
Infinifill™
Maintains The Perfect Edge
The
pool uses a normal pump, filter and plumbing. This allows standard
circulation and filtering methods to be used for the normal circulation
tasks.
A
dedicated sump pump and filter are used for circulation between
the sump and pool.
 Level 1 is the correct water level in the sump for operation of the infinite
or negative edge feature. If the water level goes below Level 1,
the Infinifill™ automatically adds water until the proper level
is reached, so the edge is maintained.
When
someone enters the pool or wind blows water over the edge or a check
valve bleeds back, the water level will rise in the sump. The Infinifill™
will automatically activate the pumps when the water rises to Level
2. This will lower the water in the sump and return it
to the pool and the edge will be established again.
When
there is rainfall the overall system water level will rise and the
edge is lost. When the water reaches Level 3, water is removed from
the sump and thus the pool. When the level goes below Level 2 the
water removal is stopped. The edge is established again.
|
