|
Model
3005
To
obtain more information or to order your
Water Stabilizer contact one of our friendly and knowledgeable hydro-experts
at (760) 878-2357.
| Wailani
Water Level Stabilizer Models |
Model
3005
|
Adds
water to pool, spa, pond and fountain. |
Fill
System with 24 foot sensor cord. Includes one irrigation quality water
valve. |
|
|
|
| Model
3105 |
Adds
and removes water for pools, spas, ponds, and fountains. |
Fill
and Dump System with 24 foot sensor cord. Includes two irrigation
quality water valves. Also includes circulation pump relay. |
|
|
|
| Options: |
|
|
| SC |
Sensor
Cord In excess of 24 feet. |
Sensor
cord lengths available up to 100 feet. |
| 300-5 |
Individual
Fill/Ideal/Dump Sensors |
Used
for ultimate flexibility in setting water level heights. |
| Specifications: |
|
|
|
Input
Power
|
|
115
vac or 220 vac |
| Valve |
|
Irrigation
Diaphragm Valve |
| Function
Delay |
|
Automatic
time delay between sensor changes and the start of the fill or dump
functions. Thus splashing, wave action and temporary bather load do
not affect fill or dump operation. |
| Front
Panel Indicators |
|
Wet
or Dry Sensor Indicators, Power On, System Mode, Freeze Guard, Sensor
Fault |
| Fill
& Dump Override |
|
As
additional protection, if the fill or dump function takes longer than
it should, the function will end. The fault light will be illuminated.
Should normal operating conditions occur the unit will automatically
resume normal operation, but the fault light will remain on. This
can be reset by cycling the power on and off. |
| Valve
Voltage |
|
24
vac |
| Length
of sensor cord |
|
24
foot is the standard length. Standard lengths up to 100 feet are available.
Long distance cable lengths up to 500 feet are available. |
| Sensor
Assembly Colors |
|
Brushed
Stainless Steel |
| Controller
Enclosure |
|
Metal
outdoor enclosure. Powder Coated interior and exterior.
8" x 10" x 5" |
| <Previous |
|
|
|
| |
©2008
Wailele Pools Inc. All Rights Reserved
|
|
|
