Previous

Home Page

Models SBX-300, 400, 500, 600
Bypass Instructions

Find the diagram that matches your present power and pump wiring.
Then follow the instructions.

We suggest a licensed electrician perform the following.

Turn off the circuit breaker to the pool equipment. Indentify each wire. Then remove the wire on Pin 5 and put a wire nut on it. Remove the wires on 1 and 4 and wire nut them together. Remove the wires on 3 and 6 and wire nut them together. When the circuit breaker is turned on, the pump will run in high speed.

Turn off the circuit breaker to the pool equipment. Indentify each wire. Then remove the wire on Pin 5 and put a wire nut on it. Remove the two wires on pin 3 and wire nut them together. Remove the wires on 4 and 7 and wire nut them together. When the circuit breaker is turned on, the pump will run in high speed.

Turn off the circuit breaker to the pool equipment. Indentify each wire. Then remove the wire on Pin 5 and put a wire nut on it. Remove the wires on 1 and 4 and wire nut them together. Remove the wires on 3 and 6 and wire nut them together. When the circuit breaker is turned on, the pump will run in high speed.