Pool and Spa Remote
Temporary Power Bypass Instructions

Find the diagram that matches your present power and pump wiring.
Then follow the instructions.

Have a licensed electrician perform the following.

Turn off the circuit breaker to the pool equipment. Identify each wire. Then remove the wire from pin 6 and put a wire nut on it. Remove the wires on pins 1 and 4 and wire nut them together. Remove the wires on pins 3 and 5 and wire nut them together. When the circuit beaker is turned on the pump will run in high speed.

Turn off the circuit breaker to the pool equipment. Identify each wire. Then remove the wire from pin 7 and put a wire nut on it. Remove the wires on pins 1 and 5 and wire nut them together. Remove the wires on pins 3 and 6 and wire nut them together. When the circuit beaker is turned on the pump will run in high speed.